Cross-plane Crank For Next Yamaha R6?
Since the R1’s new firing order appears to be successful, it begs the question about whether this system can be incorporated into Yamaha’s 600cc sportbike, the YZF-R6. So we questioned the R1’s project leader, Toyoshi Nishida, about whether we might see this configuration in the middleweight screamer. The R1’s project leader hinted that the next R6 might feature new engine technology that will enhance a rider’s feeling for traction at the rear tire. He told us that because a 600’s power output isn’t nearly as potent as a literbike’s, racers in the smaller class usually apply only full power, so the cross-plane’s part-throttle benefits wouldn’t be so obvious. He added that the counter-balancer necessary with the cross-plane arrangement would sap some power, hence it wouldn’t be the most efficient way to provide that direct connection to rear-tire traction for a 600.
However, he hinted that there is another way to aid rear-tire traction, and one that doesn’t involve electronics. Curious about what he referred to, I asked if there was the possibility of using a single-plane crankshaft arrangement in which the two paired pistons fire at the same time (instead of 180 degrees apart), similar to a project used a few years ago in the British Superbike championship on a Yamaha R1. That engine proved to work well in wet conditions, but it was soon outlawed by race organizers. Nishida-san’s response indicated I was barking up the wrong tree, but any loyal engineer would naturally want to keep information like that to himself. Whatever the case, we may see something special in the engine compartment when the next R6 is revealed.
Related Post
2009 Yamaha RD350 Concept
Transformation Yamaha Vixion Elegant Motogp Fiat Yamaha
Gold Shine of Yamaha Jupiter MX becomes a Championship
Home
However, he hinted that there is another way to aid rear-tire traction, and one that doesn’t involve electronics. Curious about what he referred to, I asked if there was the possibility of using a single-plane crankshaft arrangement in which the two paired pistons fire at the same time (instead of 180 degrees apart), similar to a project used a few years ago in the British Superbike championship on a Yamaha R1. That engine proved to work well in wet conditions, but it was soon outlawed by race organizers. Nishida-san’s response indicated I was barking up the wrong tree, but any loyal engineer would naturally want to keep information like that to himself. Whatever the case, we may see something special in the engine compartment when the next R6 is revealed.Related Post
2009 Yamaha RD350 Concept
Transformation Yamaha Vixion Elegant Motogp Fiat Yamaha
Gold Shine of Yamaha Jupiter MX becomes a Championship
Home
What’s a Cross-plane Crankshaft?
The cross-plane crankshaft has its pistons arranged 90 degrees apart from each other. As high-performance motorcycle engines have grown more powerful, it’s become difficult to harness that power through the small contact patch on the rear tire. A typical four-cylinder engine uses a flat-plane crankshaft, and the two outer and two inner pistons rise and fall in pairs, firing 180 degrees apart. Torque is applied to the crank during combustion, of course, but also from inertia as the crankshaft rotates. This inertial torque is seen as noise to engineers, and it has the effect of confusing a rider about the amount of traction available from a bike’s rear tire.
The same holds true in the world of MotoGP racing, so Yamaha engineers introduced in 2004 an uneven firing interval for its inline four-cylinder M1 with what’s called a cross-plane crankshaft. In this new design the pistons are arranged 90 degrees apart from each other around the crank, which eliminates the inertial torque fluctuation of a typical four-cylinder mill. A balance shaft keeps vibration at tolerable levels. Yamaha has adapted this configuration to its R1 streetbike, providing enhanced traction and a very distinctive exhaust note we’ve been hearing from Valentino Rossi’s racebike.
Related Post
Tips to Care Motorcycle Chain
Simple Riding Yamaha FZ6R
Modification of Kawasaki KLX 150
Home
The same holds true in the world of MotoGP racing, so Yamaha engineers introduced in 2004 an uneven firing interval for its inline four-cylinder M1 with what’s called a cross-plane crankshaft. In this new design the pistons are arranged 90 degrees apart from each other around the crank, which eliminates the inertial torque fluctuation of a typical four-cylinder mill. A balance shaft keeps vibration at tolerable levels. Yamaha has adapted this configuration to its R1 streetbike, providing enhanced traction and a very distinctive exhaust note we’ve been hearing from Valentino Rossi’s racebike.
Related Post
Tips to Care Motorcycle ChainSimple Riding Yamaha FZ6R
Modification of Kawasaki KLX 150
Home
Copyright © K 15 UT modification.
